The BMP 6 screw pump is the universal device of choice for building renovation. This device is ideal for processing all mineral-based materials.
and bituminous products with a grain size of up to 2.0 mm by injection or spraying (borehole suspensions, sealing slurries,
Fine plasters, grouting mortar, joint mortar, thick coatings).
Products containing solvents should only be used after consultation with the manufacturer. For pure injection / backfilling, only
a 230 Volt / 50 Hz power connection is required. Depending on the product, a compressor with an air output of 150
ltr (low-viscosity media) up to 400 ltr (thick bitumen coating). A large selection of accessories enables use with
all packer systems available on the market. The material is conveyed via a rotor and stator. The
Delivery rate can be infinitely adjusted from 0.5 to 14 ltr / min. A remote control is optionally available.
Consisting of:
+ screw pump 0.5 – 14 ltr.
+ Chassis
+ hopper 30 ltr.
+ electric 2 gear motor with speed adjustment
+ Connection for e-remote control
+ Material connection GEKA
+ 2-speed continuously variable transmission
+ Without toolbox/manometer
| Gewicht | 25 kg |
|---|---|
| max Leistung in ltr./min | 14 |
| Förderweite max. | 30 |
| Förderhöhe max. | 10 |
| Motor in kW | 1, 8 |
| max. Korngröße in mm | 2 |
| max. Druck in bar | 25 |
| Behältervolumen in ltr. | 60 |
Consisting of:
+ screw pump 0.5 – 14 ltr.
+ Chassis
+ hopper 30 ltr.
+ electric 2 gear motor with speed adjustment
+ Connection for e-remote control
+ Material connection GEKA
+ 2-speed continuously variable transmission
+ Without toolbox/manometer
| Gewicht | 25 kg |
|---|---|
| max Leistung in ltr./min | 14 |
| Förderweite max. | 30 |
| Förderhöhe max. | 10 |
| Motor in kW | 1, 8 |
| max. Korngröße in mm | 2 |
| max. Druck in bar | 25 |
| Behältervolumen in ltr. | 60 |
Seit 1997 bieten wir ein Vollsortiment an Geräten, Zubehör und Ersatzteilen für die Spritztechnik und den Bautenschutz. Für die Oberflächentechnik umfasst unser Sortiment Handpistolen, Automatikpistolen, pneumatische, elektrische und hydraulische Geräte im Hoch- und Niederdruckbereich, 2K-Anlagen, Elektrostatik-Spritzsysteme sowie Kompressoren, Filteranlagen, Rührwerke und vieles mehr.
© 2025 by b&m GmbH. All Rights Reserved.
